THE UNIVERSITY
OF |
Welcome to Dr. Nesimi Ertugrul's home page |
CONTACT ADDRESS:
Assoc. Prof. Nesimi Ertugrul
The University of
Tel: 61-8-8303 5465
Fax: 61-8-8303 4360
Publications:
1. Ertugrul N. (2002), LabVIEW
for Electric Circuits, Machines, Drives and
Laboratories (436 pages), Prentice
2. Ertugrul N. (2000), LabVIEW-Based
Course on Electrical Machines and Circuits
(77 pages), published by National Instruments Inc., Part No:
322765A-01,
4. Ertugrul N. and Acarnley
P.P.(1996), Sensorless
Control of AC Motor Drives : Speed and Position Sensorless
Operation, Editors: K. Rajaskekara,
A. Kawamura, and K. Matsuseet, IEEE Press,
ISBN:
0780310462, pp. 310-317.
6. Ertugrul N. (Sole Coordinator and
Invited Guest Editor) and Henry J. (Guest Editor), (2000), The Special
Issue on
Applications of LabVIEW in Engineering
Education
(with an accompanying CD), the International Journal of Engineering
Education,
Vol. 16 No. 3, (113 pages)
12. An
J. S., N. Ertugrul
and W.L.Soong, Sensorless
Position Estimation in a Fault Tolerant Surface-Mounted Permanent
Magnet AC
Motor Drive with Redundancy, IEEE IECON 2006, Paris.
13. J. Zhu,
14. Li Y.
and Ertugrul
N. (2003), "A Novel, Robust DSP-Based Indirect Rotor Position
Estimation
for Permanent Magnet AC Motors Without Rotor Saliency, IEEE
Transactions on
Power Electronics, Vol. 18, No. 2, March, p.p. 539-546.
15. Li Y.
and Ertugrul
N. (2000), "The Intelligent Drive for Permanent Magnet AC Motors with
the
Least Number of Sensors", Australian Journal of Electrical and
Electronics
Engineering, Vol 20, No. 1, pp. 9-15.
16. Ertugrul
N. and Cheok A., (2000), "Indirect Angle
Estimation in Switched Reluctance Motor Drives using Fuzzy Logic Based
Motor
Models", IEEE Transactions on Power Electronics, Vol. 15, No. 6, Nov,
p.p.
1029-1044.
17.Cheok A.
and Ertugrul N., (2000), "High Robustness
and
Reliability of a Fuzzy Logic Based Angle Estimation Algorithm for Sensorless Switched Reluctance Motor Drives",
IEEE
Transactions on Power Electronics, Vol. 15, No. 2, March, p.p. 319-334.
18.Cheok A.
and Ertugrul N., (1999), "High Robustness
of an
SR Motor Angle Estimation Algorithm using Fuzzy Predictive Filters and
Heuristic Knowledge based Rules", IEEE Transactions on Industrial
Electronics, Vol. 46, No. 5, October, pp. 904-916.
19. Cheok A.
and Ertugrul N., (1999), "Use of Fuzzy
Logic
Modelling, Estimation and Prediction in Switched Reluctance Motor
Drives",
IEEE Transactions on Industrial Electronics, Vol. 46, No. 6, December,
pp.
1207-1224.
20. Ertugrul
N. and Acarnley P.P., (1994), "A New
Algorithm
for Sensorless Operation of Permanent
Magnet
Motors", IEEE Transactions on Industry Applications, Vol. 30, No. 1,
January/February, p.p. 126-133.
23. Zhu
J., Ertugrul N., and Soong
W.L., (2005), “Modeling and Simulation of
Electromagnetic Torque in a Fault Tolerant Brushless
24. An J.S., Ertugrul
N., and Soong W.L. (2005), “Sensorless
Position Estimation in a Fault Tolerant Motor Drive with Redundancy”,
Australasian Universities Power Engineering Conference (AUPEC05), 25-28
Sept.,
25. Li
Y. and Ertugrul
N., (2004), “A Starting Strategy for a Robust Position Sensorless Technique in Non-Salient PM AC Motor
Drives”, IEEE 4th International Power Electronics and Motion
Control Conference IPEMC, 14-16 August,
26.Ertugrul N., Soong
W., Dostal G. and Saxon D.,
(2002), "Fault Tolerant Motor Drive System with Redundancy for Critical
Applications", IEEE 33rd Power Electronics Specialists
Conference, Cairns, Australia, 23-27 June 2002, pp. 1457-1462.
27.Ying L. and Ertugrul
N., (2002), "A New Algorithm for Indirect Position Estimation in
Permanent
Magnet AC Motors", IEEE 33rd Power Electronics Specialists
Conference, Cairns, Australia, 23-27 June, pp. 289-294.
28.Ertugrul N., Soong
W. L., Valtenbergs S. and
H. NG Chye P., (2001), “Investigation of a
Fault Tolerant and High Performance Motor Drive for Critical
Applications”, IEEE Region 10 International Conference on Electrical
and
Electronic Technology, TENCON 2001, Singapore, 19-22 August, pp.
542-548.
29.Ying L. and Ertugrul
N., (2001), "A Novel Method of Reconstruction of Three Phase Line
Currents
from DC Link Current for Brushless Permanent Magnet AC Motors ", IEEE
Region 10 International Conference on Electrical and Electronic
Technology,
TENCON 2001, Singapore, 19-22 August, pp. 606-612.
30.Ying L. and Ertugrul
N., (2000), "A Novel Position Sensorless
Control
of Permanent Magnet AC Motors", IEEE 3rd International Power
Electronics
and Motion Control Conference, IPEMC-2000, Beijing, China, August
15-18, pp.
169-174.
31. Ying
L. and Ertugrul
N., (1999), "The Dynamic Simulation of the Three-Phase Brushless
Permanent
Magnet AC Motor Drives with LabVIEW",
Australasian Universities Power Engineering Conference, AUPEC'99,
Darwin, 26-29
September, pp. 11-16.
32. Ying
L. and Ertugrul
N., (1999), "The Intelligent Drive for Permanent Magnet AC Motors with
the
Least Number of Sensors", Australasian Universities Power Engineering
Conference, AUPEC'99, Darwin, 26-29 September, pp. 484-489.
33. Ertugrul N. and
Cheok A., (1998), "Indirect Angle
Estimation in
Switched Reluctance Motor Drives using Fuzzy Logic Based
Predictor/Corrector", IEEE, 29th Annual Power Electronics Specialists
Conference, Fukuoka, Japan, May, Vol. 1, pp. 845-851.
34.
Cheok A. and Ertugrul
N., (1998), "High Robustness and Reliability
of a Fuzzy Logic Based Angle Estimation Algorithm for Practical
Switched
Reluctance Motor Drives", IEEE, 29th Annual Power Electronics
Specialists
Conference,
35.
Ertugrul N. and
Acarnley P.P., (1997), “Indirect Rotor
Position
Sensing in Real-Time for Brushless Permanent Magnet Motor Drives”, IEEE
Applied Power Electronics Conference, Atlanta, Georgia, USA,
23-27
February, Vol. 2, pp. 736-742.
36.
Cheok A. and Ertugrul
N., (1996), “A Model Free Fuzzy Logic Based
Rotor Position Sensorless Switched
Reluctance Motor
Drive”, IEEE, Industry Applications Society 31st Annual Meeting, San
Diego, USA, 4-10 October, Vol. 1, pp. 76-83.
37.
Cheok A. and Ertugrul
N., (1995), “Sensorless
Rotor Position Detection Techniques in Switched Reluctance Motor
Drives”,
Australasian Universities Power Engineering Conference, Perth,
27-29
September, Vol. 1, pp. 101-106.
38.
Ertugrul N. and
Acarnley P.P., (1992), "A New Algorithm for
Sensorless Operation of Permanent Magnet
Motors",
IEEE, IAS, 27th Annual Meeting, Houston, Texas, USA, October
4-9,
pp. 414-421.
39.
Acarnley P.P.
and Ertugrul N., (1992), "Rotor Position
Estimation in PM Motors", ICEM, International Conference on Electrical
Machines, Manchester, UK, 15-17 Sept., pp. 622-626.
40. Ertugrul N. and
Acarnley P.P., (1992), "Analytical Solution
of
the System Equations of the Axial Field Permanent Magnet Synchronous
Motor
Drive", ICEM, International Conference on Electrical Machines,
Manchester,
UK, 15-17 Sept., pp. 785-789.
41.
Ertugrul N., Acarnley
P.P. and French C.D, (1993), "Real-Time Estimation
of Rotor Position in PM Motors During Transient Operation", 5th
European Conference on Power Electronics and Application (EPE),
Conference,
Brighton, UK, 13-16 September 1993, Vol. 5, pp. 311-316.
43.
Liaw C.Z., Whaley D.M., Soong W.L., and Ertugrul
N.,
(2006), "Investigation of Inverterless
control
of interior permanent-magnet alternators", IEEE Transactions on
Industry
Applications, Volume 42, Issue 2, March-April, pp. 536-544.
44.
Liaw C.Z., Soong
W.L., Welchko B.A. and Ertugrul
N. (2005), “Uncontrolled Generation in Interior Permanent Magnet
Machines,” IEEE Transactions on Industry Applications, vol. 41, No. 4,
Jul./Aug, pp. 945-954.
45.
Soong W. L. and
Ertugrul N. (2002), "Field-weakening
Performance
of Interior Permanent Magnet Motors", IEEE Transactions on Industry
Applications, Vol. 38, No. 5, Sept/Oct, pp. 1251-1258.
46. Cheok A. and Ertugrul
N. (2001), "Computer Based Automated Test
Measurement System for Determining Magnetization Characteristics of
Switched
Reluctance Motors", IEEE Transactions on Instrumentation and
Measurements,
Vol. 50, No. 3, June, pp. 690-696.
47.
W.L. Soong,
G.B. Kliman, R.N. Johnson, R. White and J.
Miller,
(2000), “Novel High Speed Induction Motor for a Commercial Centrifugal
Compressor,” IEEE Trans. Industry Applications, Vol. 36, No. 3,
May/Jun,
pp. 706-713.
48.
Liew G.S., Ertugrul
N., Soong W.L and J. Gayler,
(2006), “An Investigation of Advanced Magnetic Materials for Axial
Field
Brushless Permanent Magnet Motor Drives for Automotive Applications”,
IEEE 37th Power Electronics Specialists Conference, June, on
CD,
Paper ID P11088, (7 pages).
49.
Liew G.S., Ertugrul
N., Soong W.L., J. Gayler,
(2005), “Investigation of Axial Field Permanent Magnet Motor Utilizing
Amorphous Magnetic Material”, Australasian Universities Power
Engineering
Conference (AUPEC05), 25-28 Sept., Tasmania, Australia, Vol. 2, pp.
592-597.
50. Morales-Castorena A., Soong
W.L. and Ertugrul N.,
(2005), “Analysis and Design of the Stator Windings of a Bearingless Motor for Comparisons of Force
Capabilities
with Different Rotors”, IEEE 6th International Conference on
Power Electronics and Drive Systems Conference, Kuala Lumpur, Malaysia,
28
Nov-1 Dec., on CD, Paper ID 4B.06 P0287, (6 pages).
51. Liaw C.Z., Soong
W.L., Welchko B.A. and Ertugrul N., (2004), “Uncontrolled Generation in
Interior Permanent Magnet Machines”, IEEE Industrial Application
Society
(IAS) 39th Annual Meeting, 3-7 October,
52.
Liaw C.Z.,
Whaley D.M., Soong W.L. and Ertugrul
N., (2004), “Investigation of Inverterless
Control of Interior Permanent Magnet Alternators”, IEEE Industry
Applications Society (IAS) 39th Annual Meeting, 3-7 October,
53. Ertugrul N., Soong
W.L., Gayler J. and Rybak
T., (2004), “High-Efficiency Magnetic Ballast
Design Utilizing Amorphous Metal Core”, Australasian Universities Power
Engineering Conference (AUPEC04), 26-29 September, Brisbane,
Australia,
on CD, Paper ID 139, (6 pages).
54. Ertugrul N. and
Chong E., (1997), “Modelling and Simulation
of
An Axial Field Brushless Permanent Magnet Motor Drive”,
EPE�€™97, 7th European Conference on Power Electronics and
Application, Trondheim, Norway,
8-10
September, Vol. 3, pp. 387-392.
55.
Ertugrul N. and
Doudle C., (1996), “Dynamic Analysis of A
Single-Phase
Line-Starting Permanent Magnet Synchronous Motor”, IEEE International
Conference on Power Electronics, Drives and Energy Systems for
Industrial
Growth (PEDES), New Delhi, India, 8-11 January, pp. 603-609.
56.
Soong W. L. and
Ertugrul N., (2000), "Field-weakening
Performance of Interior Permanent Magnet Motors", IEEE Industry
Applications Society Annual Meeting and World Conference on Industrial
Applications of Electrical Energy, Rome, Italy, October 8-12, pp.
416-423.
58.
Supangat R., Grieger
J., Ertugrul N., Soong
W.
L., Gray D. A. and Hansen C., (2006), “Detection of Broken Rotor Bars
in
Induction Motor Using Starting Current Analysis and Effects of
Loading”,
IEE Proceedings Electric Power Applications, in print, Paper Number
EPA-2006-0060, (8 pages).
59.
Grieger J., Supangat
R., Ertugrul N., Soong
W.
L., Gray D. A. and Hansen C., (2006), “Improved Detection of Static
Eccentricity Severity in Induction Motors for On-Line Condition
Monitoring”, IEEE Industry Applications Society (IAS) 41st Annual
Meeting, Florida, USA, on CD, Paper ID EMC06043, (8 Pages).
60.
Ahmed I., Ertugrul N. and Soong W.L., (2006), “A Study of Detection of
Broken
Rotor Bars in Induction Motors using Instantaneous Power” Proceedings
of the
IASTED International Conference Energy and Power Systems, 29-31 March,
2006,
Chiang Mai, Thailand, on CD, Paper ID 526-069, pp. 245-250.
61.
Supangat R., Ertugrul
N., Soong W.L., Gray D.A., (2005), Hansen
C. and Grieger J., “Broken Rotor Bar Fault
Detection in
Induction Motors Using Starting Current Analysis,” 11th
European Conference on Power Electronics and Applications (EPE),
Dresden,
Germany, on CD, Paper ID 347, (10 pages).
62.
Ahmed
63.
Ahmed I., Supangat
R., Grieger J., Ertugrul
N.
and Soong W. L., (2004), “A Baseline Study
for
On-Line Condition Monitoring of Induction Machines”, Australasian
Universities Power Engineering Conference (AUPEC04), 26-29 September,
Brisbane,
Australia, on CD, Paper ID 191, (6 pages).
64.
Siau J., Graff
A., Soong W.L. and Ertugrul
N. (2004), “Broken Bar Detection in Induction Motors Using Current and
Flux Spectral Analysis,” Australian Journal of Electrical and
Electronic
Engineering, Vol. 1, No. 3, pp. 171-177.
65.
Sin M.L., Soong
W.L. and Ertugrul N., (2003), “Induction
Machine On-Line Condition Monitoring And
Fault
Diagnosis - A Survey”, Australasian Universities Power Engineering
Conference,
66.
Graff A., Siau
J., Soong W., Ertugrul
N.,
(2003), “Broken Bar Detection In Induction Motors Using Current and
Flux
Spectral Analysis”, Australasian Universities Power Engineering
Conference, Christchurch, New Zealand, 28 Sept.-1 Oct., on CD, Paper
No. 86, (6
pages).
68.
Zivotic-Kukolj V., Soong W.L. and Ertugrul
N.,
(2006), “Iron Loss Reduction in an Interior PM Automotive
Alternator,” IEEE Transactions on Industry Applications, in-print,
paper
ID EMC-05-044, (10 pages).
69.
Soong W.L. and Ertugrul
N. (2004), “Inverterless
High Power Interior Permanent Magnet Automotive Alternator,” IEEE
Transactions on Industry Applications, Vol. 40, no. 4, July/Aug, pp.
1083-1091.
70.
Zivotic-Kukolj V., Soong W.L. and Ertugrul
N.
(2005), "Modelling of Saturation And
Cross-Saturation Effects In An Interior PM Automotive Alternator,"
Australian Journal of Electrical & Electronics Engineering, Vol. 2,
No. 3,
pp. 209-216.
71.
Liaw C.Z., Soong
W.L. and Ertugrul N., (2006), "Low-Speed
Output
Power Improvement of an Interior Permanent Magnet Automotive
Alternator,"
IEEE Industry Applications Society (IAS) 41st Annual Meeting, 8-12
October,
72.
Liaw C.Z., Soong
W.L. and Ertugrul N., (2005), "Closed-Loop
Control and Performance of an Inverterless
Interior
PM Automotive Alternator," IEEE 6th International Conference
on
Power Electronics and Drives Systems, Volume 1, 28-01 Nov.,
73.
Zivotic-Kukolj V., Soong W.L. and Ertugrul
N.,
(2005), “Iron Loss Reduction in an Interior PM Automotive
Alternator,” IEEE Industry Applications Society (IAS) 40th
Annual Meeting, 2-6 October, Hong Kong, on CD, Paper ID 05IAS_49P1, (8
pages).
74.
Zivotic-Kukolj
V., Soong W.L. and Ertugrul
N., (2004), “Modelling of Saturation and Cross-Saturation Effects in an
Interior Pm Automotive Alternator”, Australasian Universities Power
Engineering Conference (AUPEC04), 26-29 September, Brisbane,
Australia,
on CD, Paper ID 83, (6 pages).
75.
Zivotic-Kukolj
V., Soong W.L. and Ertugrul
N., (2004), “Investigation of Iron Losses in a High Flux Interior PM
Automotive Alternator”, Australasian Universities Power Engineering
Conference (AUPEC04), 26-29 September, Brisbane, Australia, on
CD, Paper
ID 81, (6 pages).
76.
Whaley D.M., Soong
W.L. and Ertugrul N., (2004), “Extracting
More
Power From the Lundell Car
Alternator”,
Australasian Universities Power Engineering Conference (AUPEC04), 26-29
September, Brisbane, Australia, 26-29 September, on CD, Paper
ID 82, (6
pages).
77. Soong W.L. and Ertugrul
N., (2003), “Inverterless
High Power Interior Permanent Magnet Automotive Alternator,” IEEE
Industry Applications Society 38th Annual Meeting,
78.
Brand S. and Ertugrul
N., and Soong W., (2003), “Investigation
of An
Electric Assisted Bicycle and Determination of Performance
Characteristics”,
Australasian Universities Power Engineering Conference, Christchurch,
New
Zealand, 28 Sept.-1 Oct., on CD, Paper No. 116, (6 Pages).
79.
Soong W. L., Ertugrul
N., Lovelace E. C., and Jahns
T.M., (2001), "Investigation of Interior Permanent Magnet
Offset-Coupled
Automotive Integrated Starter/Alternator", IEEE, IAS Annual Meeting,
Chicago, Illinois, USA, Sept. 30- Oct. 5, pp. 429-436.
81. Gargoom A. M., Ertugrul
N., and Soong W. L.,
(2005), “A Comparative Study on Effective Signal Processing Tools for
Optimum Feature Selection in Automatic Power Quality Events
Clustering”,
IEEE Industry Applications Society (IAS) 40th Annual
Meeting, Hong
Kong, pages, on CD, Paper ID 05IAS_03P1, (7 pages).
82.
Gargoom A. M., Ertugrul
N., and Soong W. L.,
(2005), “A Comparative Study on Effective Signal Processing Tools For
Power Quality Monitoring”, 11th European Conference on Power
Electronics
and Applications (EPE), Dresden, Germany, on CD, Paper ID 915, (10
pages).
84. D.
M. Whaley, G. Ertasgin1, W. L. Soong, N. Ertugrul, J. Darbyshire,
H. Dehbonei, C. V. Nayar
and, “Investigation of a Low-Cost
Grid-Connected Inverter for Small-Scale Wind Turbines Based on a
Constant-Current
Source PM Generator”, IEEE IECON 2006, Paris.
85.
Whaley D. M., Soong
W. L., and Ertugrul N., (2006),
“Investigation
of Switched-Mode Rectifier for Control of Small-Scale Wind Turbines,”
IEEE Industry Applications Magazine, in-print, Paper ID IAS80p1, (9
pages).
89.
Ertugrul N.,
(2000), "Towards Virtual Laboratories: A Survey of LabVIEW-Based
Teaching/Learning Tools and Future Trends", The Special Issue on
Applications of LabVIEW in Engineering
Education,
International Journal of Engineering Education, No. 16, Vol. 3,
p.p.
171-179.
90.
Ertugrul N.,
(1998), "New Era in Engineering Experiments: An Integrated Interactive
Teaching/ Learning Approach and Real Time Visualisations",
International
Journal of Engineering Education, Vol. 14, No. 5, pp. 344-355.
91.
Ertugrul N. and
Rameez M., (2000), "Development of An Interactive Teaching/Learning Tool for an
Interdisciplinary Course, Power Electronics", IASTED International
Conference on Computers and Advance Technology in Education,
92.
Ertugrul N.,
(2000), "Cost Effective and Advanced Teaching Laboratory Development at
the
93.
Ertugrul N., Padde
S. and Santoso A., (2000),
"An Application of Remote Area Experimentation in Electrical
Engineering", IASTED International Conference on Computers and Advance
Technology in Education, Cancun, Mexico, May 24-27, pp. 41-44.
94.
Ertugrul N. and
Cheok A., (1999), "An Automated Method of
Determination of Magnetisation Characteristics of Switched Reluctance
Machines", Australasian Universities Power Engineering Conference,
AUPEC'99,
95.
Ertugrul N.,
(1999), "LabVIEW-Based Interactive/Visual
Electrical Machines and Drives Teaching Laboratory at the University of
Adelaide", Proceedings of National Instruments NI Week, on CD, August
18-20, USA, (6 pages).
96.
Ertugrul N.,
Parker A. P., and Gibbard M. J., (1997), “Interactive Computer-Based
Electrical Machines and Drives Tests in the Undergraduate Laboratory at
The
University of Adelaide”, EPE�€™97, 7th European Conference on
Power Electronics and Application, Trondheim,
Norway,
8-10 September, Vol. 4, pp. 990-995.
Education
1993 PhD
Degree in Electrical Engineering at the University of
Thesis:
"Position Estimation and Performance Prediction for Permanent
Magnet Motor Drives".
1988 MSc
in Electronic and Communication Engineering,
Thesis:
Speed Control of Slip-Ring Induction Motor from Rotor Circuit and the
Design of a Static Starting Circuit.
2000 Winning
Application Paper at VIP Days 2000 paper contest, National Instruments
Inc. USA.
1999 Outstanding Application in
Academic Category, National Instruments, NI Week, August 1999.
1997 Winning Application at
Jan
2007- Present , Associate Prof., School
of Electrical and Electronic Engineering, University of
Jan
2000-Dec 2006, Senior Lecturer, School of Electrical and Electronic
Engineering, University of
Nov.1994-Dec.1999 Lecturer B, Department of
Electrical and
Electronic
Jan.1994- Nov1994 Assistant Professor at Electric
and Electronics
Faculty of
1989-1993 PhD Study
1986-1989 Research Assistant at
Electric and Electronics Faculty of
Principal
Supervision
2006 A. Gargoom,
Ph.D., Power Quality Detection and Analysis, Completed
2003
Y.
Li, Ph.D., A PMAC Motor Drive with a Minimum Number of Sensors, Completed
1997 A.D. Cheok,
Ph.D., A New Fuzzy Logic Based Sensorless
Rotor
Position Estimation Algorithm for Switched Reluctance Motor Drives, Ph.D, Completed
2002 J. Davis, M.Sc., Energy
Consumption
Review of Mitsubishi Motors Australia, M.Sc., Completed
2001 W. Wiriyakitja,
M.Sc., Winding Current Reconstruction of Brushless PM Motor, Completed
1997 S. Mavrakis,
M.Sc., Torque and Speed Measurement in Mining Drills, Completed
2005 G. Ertasgin,
Ph.D., Grid Connected Inverters and Distributed Power Systems,
2006 Edward Tsang, Ph.D.,
Innovative Design of Soft Magnetic Composite Brushless Permanent Magnet
Motors
with Enhanced Characteristics and Manufacturing Advantages for
Commercial
Applications
2005 G. Liew,
Ph.D., Advanced Automotive Electrical Machines based on Amorphous Iron,
(writing
up stage)
2004
J. Grieger,
Ph.D., Integrated On-line Condition Monitoring in Induction Motors
2004 R. Supangat,
Ph.D., Integrated On-line Condition Monitoring in Induction Motors, (writing
up stage)
2004
J. Zhu, Ph.D., Fault Tolerant Motor
Drive Systems
2004 J.S. An, Ph.D. Sensorless
Fault Tolerant Drive Sytems for
All-Electric
Aircraft
2003 I. Ahmed, Ph.D., Condition
Monitoring
and Base-Line Study on Induction Motors, (writing up stage)
1999 S. Brand, M.Sc
(part-time), Investigation and Implementation of Electric Assisted
Bicycle, (writing
up stage)
2004
D.M.Waley, Ph.D., Low Cost, Small-Scale
Wind Generation, (writing
up stage)
2004
A. Morales-Castorena,
Ph.D., Bearingless AC Machines, Continuing
2003 C.Z. Liaw,
Ph.D., High Power Inverterless Automotive
Alternator,
(writing up stage)
2003 V. Zivotic-Kukolj,
Ph.D., Detailed Study of High Power Inverterless
Permanent Magnet Alternator with Specific Emphasis on Automotive
Applications, (writing
up stage)
Undergraduate
and
Postgraduate (in bold) Teaching
Power
Electronics and Motor Drives |
Level 4, UG, 2 |
Automotive
Electrical and Electronic Engineering (Mech.Eng) |
Level
4, UG, 2 |
Power
Electronics Systems |
M.Sc |
Power
Quality &Condition Monitoring |
Level
4, UG, 2 |
Power
Quality &Fault Diagnosis |
M.Sc |
Ertugrul
and Soong, Innovative Design of Soft
Magnetic Composite Brushless Permanent Magnet Motors with Enhanced
Characteristics and Manufacturing Advantages for Commercial
Applications, ARC Linkage with IEMS Pty. Ltd |
Ertugrul
and Soong, Advanced Future Automotive
Electrical Machines based on Amorphous Iron, ARC Linkage Grant with
Glassy Metal Technologies Ltd. |
Ertugrul, Soong, Gray and Hansen, Integrated On-line
Condition Monitoring and Failure Diagnosis in Induction Motors, ARC
Linkage Grant with National Instruments, |
Soong
and Ertugrul, Inverterless,
Wide Speed, Constant Current Mode Alternator, ARC Discovery Project,
2003 |
Ertugrul
and Schroeder, Autarky (Self-Sufficient) Hybrid Cars, Australian-German
Joint Research Co-operation Scheme |
Ertugrul
and Gayler, Investigation and Development
of High Efficiency Amorphous Magnetic Material Generators and
Transformers for Renewable Energy Applications, |
International
Competitive Schemes
Ertugrul, Cheok and Thomas, Remote Area Walking Tracking
Through Internet for Augmented Reality Applications, Collaborative
Research with |
Intramural
Schemes
Soong
and Ertugrul, High Performance Integrated
Automotive Starter/Alternator Development, |
Ertugrul
and Syrek, Investigation of Ultrasonic
Motors and Design Configurations for Direct Linear Drive, Uni. of |
Soong, Ertugrul, Gray and Hansen, On-Line Condition
Monitoring and Failure Diagnosis in Induction Machines using Multiple
Sensors, University of Adelaide Small Grant |
Ertugrul, Soong and Schneider, Investigation of a
Fault-Tolerant High Performance Motor Drive with Redundancy for an
All-Electric Aircraft, Adelaide University Small Research Grant |
Ertugrul
and Soong, Hybrid Electric Vehicle,
Faculty of ECMS |
Consultancies
Ertugrul
and Zockel, Opinion on the Work Injury, MechTest, Uni of |
Ertugrul,
Consultancy on |
Ertugrul,
Academic Partnership, National Inst. Inc |
Ertugrul, Soong, Martin and Cashin,
Workshop on Hidden Faults in Induction Motors, Condition Monitoring |
Ertugrul,
Martin and Powell, Consultancy ETSA, MechTest, |
Zockel Ertugrul, Spurkplug
Test, MechTest, Uni
of |
Soong
and Ertugrul, Motor Condition Monitoring
Motor Testing, Industry Research Consultancy with RME Ltd. |
Ertugrul
and Soong, Research and Development of
Improved Efficient Electric Machines using Amorphous Metals, Research
Consultancy with Glassy Metal Technologies Ltd. |
Ertugrul,
Report on Work Cover Corporation versus Grundfos
Pumps Pty. Ltd. & Ors., Thompson and Playford |
Ertugrul,
Report on Anthony
and Dianna McNeela versus Volta (Aust) Pty. Ltd, Thompson and Playford |
Ertugrul,
Report on Walker Australia Pty. Ltd. And Damien McEntee
SA Workers Compensations, Finlaysons
Lawyers |
Ertugrul,
Academic Partnership, National Inst. Inc |
Industrial
Linked Small Projects
Ertugrul
Real Time Information System for Shop Floor Control and Management,
Gerard Industries Pty.Ltd. |
Ertugrul,
Monitoring and Data Logging PV Panels, Origin Energy Pty.Ltd. |
Ertugrul,
Energy Management in Submarines, ASC Pty. Ltd. |
In-kind
support
Ertugrul,
A vehicle from Mitsubishi Motors Australia, SA, . |
2.
Member
of the Technology in Education Committee, which is a sub-committee of
the
University Learning and Teaching Committee, 2004-2005.
3.
International
Student Recruitment Activity in
4.
Member of Learning and Teaching Committee of Faculty of Engineering,
Computer
and Mathematical, Science, 2000-2005.
5.
Member of
6.
Work Experience Coordinator, 2006.
7.
Member of Research Committee at the
8.
Member of the
9.
Member
of Research Committee at the School of EEE, 2000-2005.
10.
Responsible for
evaluation of advance standing applications and planning articulation
programs,
2003-2005.
11.
Course Coordinator
at the School of EEE, 1995-2000.
12.
Course Advisor for
EEE and International Students at the School of EEE, 1998-2002.
13.
Staff Representative
in Staff-Student Committee at the School of EEE, 2000-2005.
14.
Student Enrollment Duties,
1995-2005.
Workshop
Organised
2003
Workshop on Hidden faults in Induction Motors, Condition Monitoring and
Invited
Presentations and Courses:
National
2006
Keynote
Speech at NI Days, “Remote Access Laboratories and Virtual
Instrumentation in Education”, April,
2005
Invited
Seminar Presentation at Ecoliving Expo on
“Electric Assisted Bicycles and Current Trend”,
2004
Invited
Seminar on Emerging Technologies in Electronic Engineering, by South
Australian
Science Teachers Associations Inc. (SASTA), May.
International
2004
Invited
Seminar Presentation at Rotating Equipment 2004, on “Condition
Monitoring
Techniques for Induction Machines”,
2004
Invited Workshop
at Rotating Equipment 2004, on “Multiple Sensor Based Non-Invasive
Condition Monitoring in Induction Machines”,
1998
Invited
Seminar on "Sensorless Brushless Permanent
Magnet Motor Drives" by Mitsubishi Electric,
Service
Activities In Profession
Memberships
1.
Member of Editorial Advisory Board of the International Journal of
Engineering
Education, Tempus Publication.
2.
Member of Technical Committee on Education in Engineering and
Industrial
Technologies, IEEE Industrial Electronics Society.
3.
Member of IEEE Industry Applications Society
4.
Member of IEEE Power Electronics Society
Regular
Reviewer of:
1.
IEEE Transactions on Industry Applications
2.
IEEE Transactions on Power Electronics
3.
IEEE Transactions on Industrial Electronics
4.
IEEE Transactions on Aerospace and Electronic Systems
5.
Journal of Power Electronics, the Korean Institute of Power Electronics.
6.
Journal
of Dynamic Systems, Measurement and Control, the American Society of
Mechanical
Engineers.
7.
International Journal of Engineering Education, Tempus Publications
8.
International Journal of Electronics, Published by Taylor and Francis
Ltd.
9.
International Journal of Computers and Electrical Engineering, Elsevier.
1.
Publications Chair and Member of Organising Committee of IEEE Power
Electronics
Specialists Conference,
2.
Session Organizer at MECHROB2004,
3.
Session Chairman at AUPEC�€™99 and 03, IEEE PEDES, IEEE TENCON 2001
4.
Member of Organising Committee of Wind Energy Workshop, Melbourne, July
9-11,
1997 and Wellington, New Zealand, July 17-18, 1997.
5.
Member of Organising and Program Committee of IEEE Power Electronics
Specialists
6.
Member of Organising and Program Committee of IEEE Power Electronics
Specialists Conference,
7.
Member of Organising and Program Committee of IEEE Power Electronics
Specialists
8.
Member of International Steering and Technical Program Committee of 2nd
IEEE
International Conference on Power Electronics, Drives and Energy
Systems for
Industrial Growth, PEDES�€™98, 30 Nov., 1-3 December 1998,
9.
Member of Technical Program Committee of the 2000 International Power
Electronics Conference, IPEC,
10.
Program committee
member of International Conference on Advanced Intelligent Mechatronics,
2003 IEEE/ASME,
11.
IEEE International
Conference on Power Electronics, Drives and Energy Systems (PEDES),
2005.
12.
Member of Review
Committee, Australasian Universities Power Engineering Conferences,
AUPEC,
1999, 2005.
13.
Member of Review
Committee, IEEE, 31st Annual Conference of Industrial
Electronics,
IECON 2005.
luzumlu bilgiler
bulabilirsiniz. Adelaide Universitesi hem Lisans, hem de Lisans
Ustu
alanda sagladigi egitimle Dunya universiteleri arasinda yer almaktadir.