References

1

D. P. Seraphim, R. C. Lasky, and C.-Y. Li, Principles of electronic packaging, ch. Introduction, pp. 1-15. McGraw-Hill series in electrical engineering, McGraw-Hill series in materials science and engineering, New York : McGraw-Hill, 1989.

2

C. A. Neugebauer, Electronics packaging forum, vol. 1, ch. 1, pp. 1-7. New York : Van Nostrand Reinhold, 1991.

3

R. Agarwal and M. Pecht, Physical architecture of VLSI systems, ch. 6, pp. 386-95. New York : Wiley, 1994.

4

P. Lall and M. Pecht, Handbook of electronic package design, ch. 5, pp. 239-56. Mechanical engineering (Marcel Dekker, Inc.), New York : Marcel Dekker, 1991.

5

D. B. Harris, M. Pecht, and P. Lall, Handbook of electronic package design, ch. 2, pp. 75-98. Mechanical engineering (Marcel Dekker, Inc.), New York : Marcel Dekker, 1991.

6

D. B. Harris, Handbook of electronic package design, ch. 4, pp. 91-3. Mechanical engineering (Marcel Dekker, Inc.), New York : Marcel Dekker, 1991.

7

D. A. Doane, Multichip module technologies and alternatives: the basics, ch. 1, pp. 3-11. New York: Van Nostrand Reinhold, 1993.

8

R. Agarwal and M. Pecht, Physical architecture of VLSI systems, ch. 6, pp. 351-86. New York : Wiley, 1994.

9

R. Fillion, R. Wojnarowski, B. Gorowitz, W. Daum, and H. Cole, ``Conformal multichip-on-flex (MCM-F) technology,'' in Proceedings 1995 International Conference on Multichip | Modules (SPIE Vol.2575), International Society for Hybrid Microelectronics and the International Electronics Packaging Society, ISHM - The microelectronics society and The international electronics packaging society (IEPS), April 1995.

10

I. Turlik, Physical architecture of VLSI systems, ch. 3, pp. 120-4. New York : Wiley, 1994.

11

R. Crowley, ``Three-dimenstional electronics packaging,'' tech. rep., TechSearch International, Inc., 9430 Research Blvd., Building 4 Suite 400, Austin, Texas 78759, November 1993. pp. 18.

12

S. Ladd, ``Designing 3D multichip modules for high volume applications-three case studies,'' in Proceedings. International Conference and Exhibition. Multichip Modules (SPIE Proc. vol.1986), (Denver, CO, USA), pp. 417-21, Int. Soc. Hybrid Microelectron, April 1993.

13

K. Sienski, R. Eden, and D. Schaefer, ``3-D electronic interconnect packaging,'' in 1996 IEEE Aerospace Applications Conference. Proceedings, vol. 1, (Aspen, CO, USA), pp. 363-73, 1996 IEEE Aerospace Applications Conference. Proceedings, IEEE; New York, NY, USA, Feb 1996.

14

R. Ackerman and D. Schaefer, ``Wire button contact retainer board for 3-D interconnected MCMs,'' in Int. J. Microcircuits Electron. Packag., vol. 19, pp. 456-61, 1996 International Conference on Multichip Modules, ISHM-Microelectron. Soc, 1996.

15

I. Turlik, Physical architecture of VLSI systems, ch. 4, pp. 198-201. New York : Wiley, 1994.

16

D. A. Doane, Multichip module technologies and alternatives: the basics, ch. 3, pp. 94-9. New York: Van Nostrand Reinhold, 1993.

17

P. D. Franzon, Multichip module technologies and alternatives: the basics, ch. 3, pp. 102-6. New York: Van Nostrand Reinhold, 1993.

18

P. D. Franzon, Multichip module technologies and alternatives: the basics, ch. 3, pp. 106-7. New York: Van Nostrand Reinhold, 1993.

19

P. D. Franzon, Multichip module technologies and alternatives: the basics, ch. 3, pp. 107-9. New York: Van Nostrand Reinhold, 1993.

20

D. A. Doane, Multichip module technologies and alternatives: the basics, ch. 3, pp. 100-2. New York: Van Nostrand Reinhold, 1993.

21

J. Minahan, A. Pepe, R. Some, and M. Suer, ``The 3D stack in short form (memory chip packaging),'' in 1992 Proceedings. 42nd Electronic Components and Technology Conference, (San Diego, CA, USA), IEEE; New York, NY, USA, May 1992.

22

M. Coello-Vera, A.and Masgrangeas, C. Val, and M. Leroy, ``256 Mbits MCM-V memory stack,'' in Proceedings 1995 International Conference on Multichip Modules (SPIE Vol.2575), (Denver, CO, USA), pp. 24-9, ISHM-Microelectron. Soc; Reston, VA, USA, April 1995.

23

C. Cahill, A. Compagno, J. O`Donovan, O. Slattery, S. O`Mathuna, J. Barrett, I. Serthelon, C. Val, J.-P. Tigners, J. Stern, P. Ivey, M. Masgrangeas, and A. Coello-Vera, ``Thermal characterization of vertical multichip modules MCM-V,'' IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part A, vol. 18, pp. 765-72, Dec 1995.

24

S. Sekine, K. Takada, H. Suzuki, K. Kodama, S. Moriya, and M. Kubota, ``A 'GaAs on Si' PLL frequency synthesizer IC using chip on chip technology,'' in Proceedings of the IEEE 1994 Custom Integrated Circuits, (San Diego, CA, USA), pp. 563-5,, IEEE New York, NY, USA, May 1994.

25

W. Lin, S. Patra, and Y. Lee, ``Design of solder joints for self-aligned optoelectronic assemblies,'' in 44th Electronic Components and Technology Conference, vol. 18, pp. 543-51, 1995. Dept. of Mech. Eng., Colorado Univ., Boulder, CO, USA.

26

Y. Lee, ``Studies on solder self-alignment,'' in LEOS '94. Conference Proceedings. IEEE Lasers and Electro- Optics Society, vol. 1, (Boston, MA, USA), p. 2, IEEE; New York, NY, USA, Oct-Nov 1994.

27

M. J. Kelly, W. R. Boulton, J. A. Kukowski, E. S. Meieran, M. Pecht, J. W. Peeples, and T. R. R., ``Electronic manufacturing and packaging in japan,'' tech. rep., The International Technology Research Institute at Loyola College in Maryland, Feb 1995.

28

R. Terrill, ``Aladdin: Packaging lessons learned,'' in Proceedings 1995 International Conference on Multichip Modules (SPIE Vol.2575), (Denver, CO, USA), pp. 7-11, ISHM-Microelectron. Soc, April 1995.

29

R. Pearson, ``Active silicon substrate multi-chip module technology for sensor signal processing and control,'' in Proceedings of 3rd International Conference on Multichip Modules (SPIE Vol.2256), (Denver, CO, USA), pp. 618-23, ISHM-Microelectron. Soc.; Int. Electron. Packaging Soc.; Electron. Ind. Assoc.; et al, ISHM-Microelectron. Soc, April 1994.

30

H. Malek and R. Pearson, ``Active silicon substrate technology for miniaturized ultra high performance processing,'' in Fifth Annual IEEE International Conference on Wafer Scale Integration, (San Francisco, CA, USA), pp. 346-57, IEEE; New York, NY, USA, Jan 1993.

31

J. C. Carson, D. R. Shostak, and D. E. Ludwing, ``smart sensors integrate detectors and processors,'' laser focus world, vol. 32, pp. 113-5, july 1996.

32

J. Stern, S. Larcombe, P. Ivey, L. Seed, A. Shelley, and N. Goodenough, ``Design and evaluation of an epoxy three-dimensionalmultichip module,'' IEEE Transactions on Components, Packaging and Manufacturing Technology, Part B: Advanced Packaging, vol. 19, pp. 188-94, Feb 1996.

33

S. Larcombe, J. Stern, P. Ivey, and L. Seed, ``Utilizing a low cost 3d packaging technology for consumer applications,'' IEEE Transactions on Consumer Electronics, vol. 41, pp. 1095-102, Nov 1995.

34

J. Stem, P. Ivey, S. Larcombe, N. Goodenough, N. Seed, and A. Shelley, ``An ultra compact, low-cost, complete image-processing system,'' in Proceedings ISSCC '95 - International Solid-State Circuits Conference (J. Wuorinen, ed.), (San Francisco, CA, USA), pp. 440, 230-1, Sheffield Univ., UK, IEEE; New York, NY, USA, Feb 1995.

35

S. Larcombe, J. Stern, P. Ivey, and N. Seed, ``An ultra-miniature camera and processing system,'' in IEE Colloquium on 'Integrated Imaging Sensors and Processing' (Digest No.1994/238), (London, UK), pp. 41, 4/1-6, Dept. of Electron. & Electr. Eng., Sheffield Univ., UK, IEE; London, UK, Dec 1994.

36

D. Frew, ``High density memory packaging technology/high speed imaging applications,'' SPIE, vol. 1346, pp. 34-40, July 1990.

37

J. Segelken, L. Wu, M. Lau, K. Tai, R. Shively, and T. Grau, ``Ultra-dense: an MCM-based 3-D digital signal processor,'' IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol. 15, pp. 438-43, Aug 1992.

38

E. Palmer and C. Newton, ``3D packaging using low-temperature cofired ceramic (LTCC),'' in International Journal of Microcircuits and Electronic Packaging, vol. 16, pp. 279-84, 1993.

39

W. Vitriol and E. Palmer, ``Qualification of 3-D space-grade memory cubes utilizing low temperature cofired ceramic (LTCC) technology,'' in Proceedings of the 1993 International Electronics Packaging Conference, vol. 1119, (San Diego, CA), pp. 1003-19, Sept 1993.

40

E. Palmer and C. Newton, ``3-D packaging using low temperature co-fired ceramic (LTCC),'' in Proceedings. International Conference and Exhibition. Multichip Modules (SPIE Proc. vol.1986), (Denver, CO, USA), pp. 1003-19, Int. Soc. Hybrid Microelectron, April 1993.

41

K. L. Tai, R. C. Frye, B. J. Han, M. Y. Lau, and D. Kossives, ``A chip-on-chip DSP/SRAM multichip module,'' in Proceedings 1995 International Conference on Multichip Modules (SPIE Vol.2575), (Denver, CO, USA), pp. 466-71, Proceedings 1995 International Conference on Multichip Modules (SPIE Vol.2575), ISHM-Microelectron. Soc, April 1995.

42

T. Borden, M. Blakely, and L. Alkalaj, ``Thermal and structural analysis of the advanced flight computer multichip module,'' in Proceedings 1995 International Conference on Multichip Modules (SPIE Vol.2575), (Denver, CO, USA), pp. 12-7, Jet Propulsion Lab., California Inst. of Technol., Pasadena, CA, USA, ISHM-Microelectron. Soc; Reston, VA, USA, April 1995.

43

L. Alkalaj and B. Jarvis, ``The design and implementation of NASA's advanced flight computing module,'' in Proceedings. 1995 IEEE Multi-Chip Module Conference, (Santa Cruz, CA, USA), pp. 40-4, IEEE Comput. Soc. Press, Jan 1995.

44

L. Matthies and L. Alkalaj, ``But what is an advance flight computer.'' Advanced Flight Computing by Jet Propulsion Laboratory, June 1994.

45

L. Arndt, ``A large area, 3-D stackable, MCM-D on C signal processor,'' in International Conference and Exhibition Multichip Modules (SPIE Vol.2256), (Denver, CO, USA), pp. 603-11, ISHM-Microelectron. Soc, April 1994.

46

E. B. Vittoz, ``Analog VLSI signal processing: Why, where and how?,'' Journal of VLSI Signal Processing, vol. 8, pp. 27-44, jul 1994.

47

J. Choi and B. J. Sheu, ``Neural information processing i,'' in Analog VLSI signal and information processing (M. Ismail and Fiez.T., eds.), ch. 7, pp. 331-3, McGraw-Hill, 1994.